Zoo Hardware Horizontal 3 Lever Mortice Lock

Description

Zoo Architectural Hardware have created a great selection of ZUKH horizontal 3 Lever mortice locks. These locks provide a deeper fixing for the handle into the door than standard dead locks or sashlocks. These locks are Horizontal - This means that the Spindle Follower and Keyhole are on a horizontal plane, rather than a vertical plane, like most standard locks. This imparts a much more spacious aesthetic, and these Horizontal Locks are used to great effect on the Midrail of panelled doors. These locks are usually used in conjunction with Door Knobs. They are very similar in shape and size to a rim lock, except that they are morticed into the door.

Horizontal mortice locks were more common before the introduction of lever handles. They were often fitted in the Georgian and Victorian times, typically in grand or more expensive homes, where a traditional rim lock was viewed as too 'rustic.' These locks are ideal replacements for old broken locks

The followers are aligned horizontally, rather than vertically, as seen on most modern locks. They also allow the key and lever handle or knob to be at the same height, which reduces the risk of catching a finger in the door.

This range is built from 3 lever designs and as such are ideal for internal doors.

Supplied in SINGLES.

NOTE: NOT suitable for fitting with a heavy un-sprung door knob. Please use a larger sprung lock like the imperial door lock version (G3011)

Diagram of 127mm version

Diagram of 152mm version