This high-quality roller sash window stop allows a sash window to be locked in an open position for ventilation. Available in two lengths, 19mm or 29mm and five finishes are available to find a stop that matches your window fittings; polished brass, polished chrome, satin chrome, Florentine bronze or PVD nickel.
This simple traditional design is manufactured from solid brass as part of the Fulton and Bray range of quality window furnishings.
Supplied with 2 x Stops and 4 x Ferrules as a set.
This set requires a 6mm Hex / Allen key for fixing, this can be purchased separately. See the link below. (not included in the set).
- Drill an 8mm/9mm Hole into the desired place on your window. Judge the size of hole by the softness of the timber you are drilling into. Err on the side of caution - you can always drill the hole out larger if required.
- Whilst loose in your hands, screw the ferrule onto the threaded shaft attached to the main body of the Sash Stop.
- When the ferrule is screwed tightly up to the body of the Sash Stop, insert the 6mm Hex/Allen Key (supplied separately) into the end of the Sash Stop.
- You can then use the complete unit to screw the ferrule clockwise into the pre-drilled hole.