Weiser door knobs were commonly used in the 1970's and 80's. Weiser use a very specific latch system which requires a large portion of the door to be removed. This can mean it is very difficult to find replacement knobs without reconstructing and filling your doors.
These ERA Door Knobs are made to Weiser specifications so can be directly and easily swapped in most cases. Easy to install, each set is supplied with fitting instructions and templates. The integral Tubular Latches supplied are adjustable to either 60mm or 70mm, which are standard Weiser sizes.
Please Note: We recommend that these knob sets are only fitted with the Tubular Latches supplied. Original Weiser latches may differ slightly in specification or be too worn to accommodate new spindles correctly.
Entrance Set: Supplied with integral key operated lock on one side, and a thumb turn on the other side. Can be locked from both sides, using the cut key for outside and turn button on the inside. 2 keys included.
Passage Set: Supplied as a non-locking latch set, allowing free access at all times.
Privacy Set: Supplied with integral thumbturn and release. can be locked from one side, and emergency-released from the other side.
Supplied in PAIRS complete with adjustable tubular latch, Spindle, and screws.