• Spend £150 save 5% spend £350 save 10%
  • Free Delivery on all orders over £50
  • Price Match Promise
Set Ascending Direction

1-10 of 16

Page:
  1. 1
  2. 2

“My grub screws keep falling out...” Today we look at how to resolve this problem, as well as asking what type of grub screw is best, and why it is that we use headless grub screws rather than normal screws or bolts...

Read more...


Read More

Window Restrictors can prevent unnecessary accidents in homes, hotels, healthcare and schools

window restrictor

Most accidents in the home involve children or older, more vulnerable people. Every year more than 4,000 children under 15-years-old are injured by falling from windows, according to the Royal Society for the Prevention of Accidents (RoSPA).

One simple and economical way in which to reduce the risk of people falling out of windows is to install our unique Cardea Solutions Window Restrictors.   Read more...

Read More

Updated Guidance on Window Restrictors

Window Restrictor

All healthcare buildings will have received a guidance document issued by the Department of Health. This was issued as a result of an incident where a patient died following a fall after forcibly overcoming the window restrictor while in an acutely confused and agitated state. 

Are your Window Restrictors safe for use?

Read More...

Read More

'Safe as houses' - But where do you hide your spare keys?

where can i hide my spare key

New research shows that thousands of families are burgled each year because of poorly-hidden house keys.

In today's blog we reveal the top 5 worst places to choose - and the best, and only safe place to choose!

Read More

How to Fit a Mortice Lock

11/12/2014 15:46

Fitting a mortice lock to a door is straightforward when you follow the More Handles guide. If you’ve recently bought a mortice lock or are adding one to a new door, our step by step guide shows you how to fit a mortice lock accurately and securely. There’s no need to hire a professional – simply follow our guide and add another feather to your DIY cap!

5 Lever Mortice Lock

Before you start fitting a mortice lock, make sure that you have all of the necessary tools to hand. You will need:

 

  • Mortice Lock
  • Pencil
  • Tape measure
  • Drill
  • Wood drill bits
  • Wood chisels
  • Mallet
  • Screwdrivers
  • Marking gauge or steel rule
  • Masking tape

 

 

Choose the right lock for you

There are various different types of mortice locks that are manufactured to different standards.

For external doors it is recommended that you use a 5 lever lock (BS3621) to conform to house insurance companies requirements.

For internal doors, 3 lever locks are sufficient.

These locks come in a variety of sizes and depths to suit different situations so be sure to check you are purchasing the right one, as once the alterations to the door has been made to fit the lock, it is very hard to change to suit a different lock.

 

Marking the door

If there has been a door previously fitted to the door frame that has had a mortice lock, it is easier to fit the mortice lock at the same height as the previous one as this will reduce the amount of work required when fitting the strike plate to the door frame.

Once you have decided at what height the lock is going to be situated you need to mark the door ready for drilling and chiselling.

Step 1: Mark a centre line down the edge of the door. With the mortice lock held up against the door at the height it is going to be, mark the top and bottom of the body of the internal mechanism and transfer these marks across the side of the door crossing the central line previously marked.

 

Preparing the door

Step 2: Measure the thickness of the housing of the internal mechanism and select a flat wood drill bit that is slightly thicker in diameter. DO NOT choose a drill bit that is wider than the front plate of the lock.

Step 3: Using the central line as a guide, drill a series of holes at a right angle to the side of the door, making sure the top and bottom holes are drilled using the position where the lines marked for the top and bottom of the internal housing cross the centre line as drilling points.

Step 4: These holes should be drilled to a depth deep enough so that the lock can be sunk in to the door and the front plate will lie flush with the side of the door. You can use a piece of masking tape wrapped around your drill bit as guide to help with this.

Step 5: Once the holes are drilled, use a sharp wood chisel and a mallet to remove the wood in between the holes leaving a rectangular hole big enough for the mortice body to slide into.

Step 6: Place the lock into the hole and mark around the front plate with a sharp pencil.

Step 7: With a mallet and a sharp chisel, chisel out a recess the thickness of the front plate so it will sit flush once fitted to the door.

Step 8: Carefully measure the position of the key hole and mark on the side of the door. You can do this by holding the lock up against the door or by using a paper template. If fitting a mortice lock with a latch, mark the centre of hole for the handle spindle also.

Step 9: Drill out the holes through the door using a drill bit and tidy up the keyhole using a hammer and chisel.

Step 10: Fit the mortice lock in place making sure to drill pilot holes for the screws to prevent splitting.

 

Fitting the strike plate

Step 11: Position the strike plate on the door frame ensuring the holes are lined up correctly with the bolt from the mortice lock.

Step 12: Mark around the outside of the strike plate and also around the inside catch areas.

Step 13: Chisel around the marked lines to the depth of the strike plate so it sits flush with the frame and chisel deep enough within the catch areas so the bolt can open out fully.

Step 14: Screw the strike plate in position remembering to use pilot holes to prevent splitting.

 

You should now have a neatly fitted mortice lock! If you found these instructions helpful or have any further suggestions to fit a mortice lock correctly, get in touch with us at More Handles. 

Posted in How To Guides 2014 Posts Home Security By Danielle Williams

National Home Security Month

23/10/2014 07:59

national home security month

October is the official National Home Security Month and is a good time of year to issue some reminders about your home security and prepare for the long dark winter months.

This Sunday 26th October 2014 we will all be changing our clocks back as Daylight Saving Time ends.   Police Statistics show the same thing every year, that as the clocks go back the criminals come out, and a 20% increase in home burglaries is recorded during the darker winter months.

So here at More Handles HQ we thought we would issue some reminders about the importance of checking your home security.  With just a little bit of effort you can greatly increase the level of security on your home and deter any burglars.

Read More
Posted in 2014 Posts Home Security By Mike Hunt

Repost from Secured By Design;

It's official: You can leave your keys outside your door

C500 Supra Keysafe

With police approval, you can now leave a spare front door key outside your house. Leaving it under a flowerpot or a mat in case of emergencies or forgetfulness is not recommended for obvious reasons. Nor is hanging it on a string inside the letterbox! Leaving a key with neighbours is better if you can trust them and if they will be there when the key is needed

Read More

Davenport Rim Lock

19/06/2014 11:38

Davenport Rim Lock
Davenport Rim Lock
The Davenport Rim Lock is created using either Solid Brass , Cast Iron and also in a Powder Coat Black finish, all in conjunction with meticulously reproduced solid brass components. These locks have a beautifully heavy quality, solid feel to them, and are ideal for period themes and restoration projects. The Davenport Rim Lock draws on original patterns and dies to make an authentic reproduction of a very old lock design. Found in locations varying from Cottages to Stately homes, this product is very versatile and looks stunning. The Rim Lock is made and supplied by a traditional English locksmith. This lock is at its best when used on traditional four or six panel doors, as these allow room on their mid rail to comfortably fit and show off the lock.


Read More

A major benefit of Cylinder Locks is the ability to create different Key System Options. Here we explain briefly the different options available.

Cylinder Locks at More Handles

Read More
Posted in How To Guides 2013 Posts Home Security By morehandles user

Cylinder Locks are easy to fit or replace. Here we show you how to fit a Euro Profile Cylinder Lock.
5 PIN DOUBLE EURO PROFILE CYLINDER CONTRACT

Read More
Posted in How To Guides 2013 Posts Home Security By morehandles user
Set Ascending Direction

1-10 of 16

Page:
  1. 1
  2. 2